Albuquerque: La Media Road SW
In this episode they made a bar top by putting toy cars and stuff in side and then pouring some type of clear liquid in that hardened and made the bar top. I need to know what that liquid was cuz I am wanting to make a bar like that. The episode is WYWO season 1. Thanks for any help.

Here's a bit of help from the homeowner - hope it helps a bit. You might want to check throughout the personal projects forum - I think several people had ideas...

originally posted by "corozin":

Clear Table Coating

We use Epoxy resin like this to laminate custom graphics and the best brand we have found is EnviroTex Lite. It is a two part epoxy resin and to do a job like that requires a good deal of experience, it is not for everyone. Each item to be coated must be meticulously clean. The resin and hardener must be measured and mixed very precisely. When it is poured, the weather conditions cannot be too hot or humid or the surface will have defects. Bubbles are formed in mixing and must be removed either by very careful use of a torch or equally careful exhaling through a soda straw. The resin is quite expensive also, but it is available at many hardware stores.